Seneste nyt om:

Seminarer • konferencer
kurser • messer
Send til en ven   Udskriv7/9 2010 kl. 11:31
Send til en ven

Fleksibel clock understøtter fra 1ms til 9,5 time

Ny lavfrekvent clock fra Linear Technology understøtter timing fra 1ms til 9,5 time (in english).

Linear Technology announces the LTC6991, a simple, accurate low frequency clock specifically designed for long duration timing applications. The LTC6991 is the latest part in the TimerBlox family of versatile silicon timing devices, in which an accurate programmable oscillator is combined with precision circuitry and logic.

An extremely wide programmable frequency range allows the clock to operate with a period from 1ms to 9.5 hours.  This makes the LTC6991 useful for intervalometers, watchdog timers and periodic wake-up timers with minimal components and effort.

The LTC6991 is simply programmed, using 1 to 3 resistors, with a maximum frequency error that is guaranteed to be less than 1.5%.  The LTC6991 offers glitch-free, first cycle accurate start-up within 500us of power, and a reset function is available to truncate the output pulse and hold the output in a high or low state. The polarity of the reset input and the output signal can be configured for active-low or active-high operation.  In addition, the output frequency of the LTC6991 can be dynamically controlled via a separate control voltage.

TimerBlox devices are solid state and can be operated under high acceleration, vibration and temperature extremes. No timing capacitors, no crystals, no microcontroller and no programming are required. They offer higher accuracy, stability and lower power consumption than typical resistor/capacitor-based oscillators. The 20mA source and sink capability enables direct driving of opto-isolators for electrical isolation. 

Fully specified over the temperature range of -40°C to 125°C, the TimerBlox parts are suitable for demanding automotive and industrial environments, where many oscillators and microcontrollers are unable to operate.  The small SOT23 footprint allows each timing device to be placed at the point of use, without routing signals over long distances, providing an ideal timer for space-limited applications such as handheld and portable devices.

- With the LTC6991, the designer can forget about big crystals, rows of counters and the headaches of programming. The LTC6991 is extremely easy to use, says Doug LaPorte, design manager for Linear Technology.

The LTC6991 is now available, priced starting at $1.35 each in 1,000-piece quantities. Other TimerBlox devices will be introduced over the next month.  
www.linear.com/6991.

 
 

Relaterede nyheder

Forrige12345678Næste

Elektronik & Data • Odsgard A/S • Stationsparken 25 • 2600 Glostrup • Tlf: +45 4345 1063