Seminarer • konferencer
kurser • messer
Send til en ven   Udskriv28/1 2010 kl. 11:08
Send til en ven

Nye ADC drivere

Linear Technology lancerer rail-to-rail input og output ADC-driver (in english). 

Linear Technology introduces the LT6350, a 33MHz, low noise, rail-to-rail input and output ADC driver that settles to 16-bits in just 350ns. It is suitable for driving the latest highest performance SAR ADCs such as the LTC2393-16.

The LT6350 incorporates two op amps and matched resistors to create a differential output from a single-ended high impedance input. As a result, a differential gain of 2 is achieved with no external feedback resistors, and higher gain can be obtained by using feedback resistors.


Each of the two internal op amps achieve a low 1.9nV/√Hz input-referred noise density, resulting in a total output-referred noise of just 8.2nV/√Hz. The LT6350 enables high performance ADCs to achieve better than 110dB SNR over a 1MHz bandwidth.

The input op amp is trimmed for constant low differential input-referred voltage offset over the input range to prevent VOS steps from degrading distortion. At 100kHz, the LT6350 can typically achieve -102/-97dBc HD2/HD3.

The LT6350 provides rail-to-rail input and output range. With a single 5V supply, the outputs can swing 0.055V to 4.945V, and by using a negative supply, the outputs can each swing from 0V to 4.945V. The LT6350 operates on 2.7V to 12V total supply. The LT6350 consumes 4.8mA supply current and has a shutdown mode that allows the system to reduce power consumption during periods of inactivity.

Fully specified commercial (0ºC to 70ºC), industrial (-40ºC to 85ºC) and extended (-40ºC to 125ºC) temperature range versions of the LT6350 are available in 8-lead MSOP and 3mm x 3mm DFN packages. Prices start at $2.59 each in quantities of 1,000 pieces. 
www.linear.com.

Forrige12345678Næste

Elektronik & Data • Odsgard A/S • Stationsparken 25 • 2600 Glostrup • Tlf: +45 4345 1063