Power, strømforsyning, EMC/ESD


100A digital POL-konverter med PMBus kommunikation

100A digital POL-konverter med PMBus kommunikation

TDK annoncerer 100A digitalt kontrolleret POL (Point Of Load) konverter, der er PMBus kompatibel (in english).

TDK Corporation announces the introduction of the iJC series of 100A Point of Load (POL) non-isolated DC-DC converters with PMBus communication. These converters utilise adaptive digital control to deliver improved transient response and system stability across a wide range of output capacitance.

Accepting an 8 to 14Vdc input, the output voltage of the iJC can be adjusted from 0.6 to 1.5V with currents of up to 100A and a maximum output power of 150W. With the current share function, converters can be paralleled to produce 180A, utilising either a PMBus command or an external resistor. Weighing just 20g and measuring 28.0 x 35.0 x 10.0mm, these ultra-compact converters are ideally suited for a wide range of applications, including communications, broadcast, industrial and test and measurement equipment.

The read and write functionality of the PMBus allows precision, real-time monitoring of the output voltage, current and temperature. The iJC’s operating parameters can also be easily programmed using the TDK-Lambda GUI interface. The converters can be used without the PMBus™ function through the use of function pins.

The iJC series will reliably operate across a wide -40 to +120oC temperature range with minimal airflow, providing a true 'useable' power. High efficiency levels are maintained across light to full loads and are as high as 91.5% for a 1.5V output.

Safety certification includes IEC/EN 60950-1, UL/CSA 60950-1 with CE marking for the Low Voltage and RoHS2 Directives.

19/6 2017
  • Texim


    Focus Suppliers Nordic