Analog, mixed-signal

 

Unik MEMS clock-generator baner vejen for ultrakompakt timing-løsning

Unik MEMS clock-generator baner vejen for ultrakompakt timing-løsning

Microchip lancerer industriens mindste multi-output MEMS clock-generator, der kan erstatte op til tre krystaler og oscillatorer på et board (in english).

Microchip announces the industry’s smallest MEMS clock generator. The DSC613 can replace up to three crystals and oscillators on a board, reducing timing component board-space by up to 80 percent. The device eliminates the need for an external crystal by integrating a low-power and high-stability MEMS resonator.

Timing devices are central to the operation of compact Internet of Things (IoT) and portable electronics, but clock sources traditionally require multiple components to meet the frequency requirements of consumer devices, thus consuming board space and power. The DSC613 clock family allows product designers to reduce application size while extending battery life.


To support the range of frequencies required in today’s smart devices, system designers need to either place multiple crystals/oscillators next to the controllers on a board or use a clock generator with an external crystal for the reference input. The DSC613 family is a true single-chip solution that integrates a MEMS resonator and two low-power Phase-Locked Loops (PLLs) into a 6-pin DFN package as small as 1.6 mm x 1.2 mm. The compact package size and extensive frequency flexibility makes the DSC613 family well suited for compact devices that require low-power operation, such as digital cameras, smart speakers, Virtual Reality (VR) headsets, streaming sticks and set-top boxes.

The DSC613 family supports up to three clock outputs from 2 kilohertz (kHz) to 100 megahertz (MHz), making it ideal for microcontroller-based embedded systems. In an IoT application, for example, the clock generator can be used to provide a MHz main reference clock and 32.768 kHz Real-Time Clock (RTC) for the microcontroller (MCU), as well as another MHz clock for functions such as connectivity and sensors.

The DSC613 family includes two low-power fractional PLLs with AnyRate clock synthesizers, which enable the device to generate any frequency between 2 kHz and 100 MHz. At approximately five milliamps (mA) power consumption with three outputs running, the family provides up to 45 percent power savings when compared to a solution that uses three low-power quartz oscillators. For additional power savings, the clock output can be turned off through the output enable pin.

MEMS products are built entirely with standard semiconductor processes, providing the same reliability and stability as integrated circuits, and the devices support up to -40 to +125 degrees Celsius temperature range with a stability of ± 20ppm. All products are backed by Microchip’s customer-driven obsolescence practice that ensures that devices will be available for as long as customers need them.

The DSC613 family is supported by Microchip’s ClockWorks online configurator tool. Customers can enter a clock configuration and receive a customised part number and datasheet, as well as order free samples at clockworks.microchip.com/timing.

Clock configuration includes output frequency, control pin function, package size, PPM accuracy and temperature range. Up to three output drive strengths are available based on the custom board loading condition. Spread-spectrum clocks are also available for EMI reduction. Application support, including board layout guidelines and schematics review, is also available.

The DSC613 family is available now for sampling and in volume production.

http://www.microchip.com/timing/DSC613
22/11 2018
Produktlinks
Find din leverandør:

  • Elfa Distrelec A/S
  • Analog mixed signal

    Tilføj dit firma
    • Texim

      Texim

      Focus Suppliers Nordic