Power, strømforsyning, EMC/ESD

 

DC/DC-konvertere til wireless og mikrobølge applikationer

DC/DC-konvertere til wireless og mikrobølge applikationer

Flex Power Modules præsenterer nye kompakte DC/DC konvertere, der er optimerede til højvolumen wireless/mikrobølge applikationer (in english).

Flex Power Modules is introducing the PKU4611A and PKU4617A, two new isolated DC-DC converters in the sixteenth-brick form factor.

The new converters are ideal for low-power radio frequency power amplifier (RFPA) requirements within small cell radios and microwave applications. They offer a wide output trim range, which is optimized for the needs of low-power radio designs that require a 5V to 7V supply.

For cost-sensitive and high-volume applications, the converters offer an excellent price-performance ratio. The converters’ design provides a relatively flat component landscape, which facilitates easy cooling within sealed box environments using thermal pads – and also makes manufacturing simpler, thus further contributing to lower overall system cost.


The converters’ efficiency is high, at typically 94% at half load and 5V output voltage. With an input voltage range of 36V to 60V, both variants provide up to 60W output power: the PKU4611A at up to 5V/12A, and the PKU4617A at up to 6V/10A.

The new devices are aimed at small cell and microwave applications requiring a 5V to 7V bus at up to 60W and 2250V isolation, in a sealed box environment. In particular, they are well suited to small cell applications for in-building wireless access, and outdoor microwave equipment supporting mobile broadband such as 3G, 4G and 5G.

Olle Hellgren, Director of Product Management and Business Development at Flex Power Modules, explains:

- With these new converters, Flex Power Modules has focused our attention on optimizing cost wherever possible – delivering a cost-efficient solution, without any compromise on quality, thermal performance or reliability. 

The converters are provided in a low-profile sixteenth-brick form factor, measuring 33.02 x 22.86 x 8.4mm (1.30 x 0.90 x 0.33in).

They provide 2250V DC input-to-output isolation, and meet safety requirements according to IEC/EN/UL 62368-1. Flex Power Modules’ highly automated manufacturing processes, with certification to ISO 9001/14001, ensure consistent quality, and the converters offer a mean time between failures (MTBF) of 5.2 million hours. The PKU-A series is available in OEM quantities.
24/1 2019
  • altoo

    altoo

    Få mere oscilloskop for pengene. Gratis undervisningsmateriale fra Keysight
  • altoo

    altoo

    Nyt om måleteknik. Gratis webinar. Tilbud på demoudstyr
  • congatec

    congatec

    Rugged 10 GbE infrastructure equipment
  • ROHM Semiconducter

    ROHM Semiconducter

    En PMIC til NXP’s i.MX 8M Mini applikations-processor
  • Texim

    Texim

    Focus Suppliers Nordic