Trådløst endoskop sender data via lys
Fraunhofer-forskere og partnere har udviklet en prototype til et endoskop, der bruger lys til at transmittere billederne fra en laparoskopisk procedure i bughulen (in english).
Without cables lying around, operations can proceed more efficiently, medical devices can be more easily cleaned and disinfected. However, the radio systems commonly used today do not meet the medical technology requirements for reliability, security and latency.
In the OWIMED project (Optical Wireless Communication for Medical Imaging Devices) Fraunhofer researchers and partners is exploring ways to enable wireless transmission with light (LiFi) technology in the operating room.
Working in close collaboration with IT Concepts GmbH and St. Joseph Krankenhaus in Berlin-Tempelhof, they are developing a wireless endoscope that can be used in laparoscopic procedures.
The researchers are integrating the LiFi technology in surgical lights and use their optimal line-of-sight connection to receive the data from the endoscope and transmit it to the monitor, where the images from the abdominal cavity are displayed in 4K quality.
- Instead of radio waves, we use modulated LED light for wireless communication. Due to the locally limited propagation of light, wireless transmission with light is ideal for medical technology. We can already meet the requirements for high data rates over short distances, says Anagnostis Paraskevopoulos, a research scientist at the Fraunhofer Institute for Telecommunications, Heinrich-Hertz-Institut, HHI, who leads the project.
Taming the cable spaghetti
Commercially available endoscopy systems require two cable connections. One, a fiber-optic cable, is for lighting, while the other is for the power supply and the data connection that enable the camera images or video stream to be displayed on the monitor.
These cable connections are not hygienic. They must be isolated with a sleeve and are draped over the patient or across the floor. This significantly disturbs work in the OR.
- Our wireless endoscope eliminates this problem. We integrate the optical light source in the form of an LED directly in the endoscope, which is battery-operated. We also include a battery-operated LiFi module in the endoscope, which transmits the data optically to the OR-environment and to the monitor. This only requires a few additional LiFi modules on the surgical light above the operating table, Paraskevopoulos explains.
A modulator switches the LED on and off at a rate that is too fast to be perceptible to the human eye. A photodiode detects these light pulses and converts them to electrical signals. The optical wireless connection is bidirectional, also enabling changes to the endoscope camera settings from the monitor.
The LiFi modules were designed to be compact, providing homogeneous hemispherical signal propagation over a 180-degree radius and thereby ensuring a robust high-speed data connection. The integrated camera chip and its microprocessor ensure low-latency data compression, enabling data transmission with low power consumption.
The surgical team at St. Joseph Krankenhaus in Berlin-Tempelhof played a key role with continuous consulting in technical development throughout the project. They finally tested the wireless endoscope prototype and the associated LiFi infrastructure in an actual OR environment using a surgical simulator in the form of a medical phantom.
- We were able to demonstrate with the tests that our LiFi solution functions very well with regard to latency, i.e., data lag, as well as reliability, data rates, light quality and ergonomics. The feedback from the surgical team was entirely positive. Once our system is fully developed, the doctors would prefer it over the cabled variant, says Paraskevopoulos.
